Here are some of the benefits of using EDT direction Combination Ion Selective Electrodes: 

  • Rugged Solid State Sensors
  • No Filling solutions
  • No membrane replacements
  • Built in dry Reference electrode
  • Waterproof and submersible
  • Suitable for Laboratory and Field work
  • Compatible with all pH and Ion Meters
  • Stored dry for long lifetime
  • Low cost
  • Easy to use

The Cadmium Sensor is a crystalline material which can be polished when the slope decreases over its lifetime. This will rejuvenate the sensor and give a longer useful life. The sensor should be stored dry with its protective cap in place.

Each EDT directION Combination ISE has a 1 metre cable and a BNC connector (other connectors available on request) allowing use on all types of pH/ION meter including laboratory bench and research models. For direct concentration reading and absolute simplicity the EDT DR359TX pH/ION meter is the perfect instrument for these ISEs.

The solid state sensors have a huge advantage over conventional ISEs in that there is no internal fill solution to degenerate the sensor this means that EDT direction combination ISEs have an unrivalled lifetime and a very low cost of ownership.

EDT are a UK based manufacturer and produce ISEs for many prominent companies in the water testing sector. As a result our ISEs are very competitively priced and come complete with technical support provided from our vast library of applications and our in house electrochemistry technicians.

For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs). Click here to see a simple calibration procedure or learn more about the principles of ISE measurement

Thumb File information
Combination ISE Brochure.pdf 1.58MB 223
3241_Manual.pdf 1.58MB 214
Accessories
Cable length 1000mm
Cap Diameter 16mm
Commodity Code 90279050
Concentration Range 0.1-11,200 ppm
Connector BNC
Diameter 12mm
Endpoint time Typically 10-60 seconds
Interferences Copper Mercury, Silver
length 155mm
pH range 3-7 pH
Potential Drift 2mV per Day
Reference Type Double Junction
Resistance at 25 Deg C < 2.5 MOhm
Temperature range 5-50 Degrees C

Write a review

Note: HTML is not translated!
    Bad           Good

Cadmium Combination ISE

  • £295.00



Recommended Essentials

Cadmium Ionic Strength Adjustment Buffer (ISAB) 500ml £25.00 Cadmium Ionic Strength Adjustment Buffer (ISAB) 500ml (£25.00)
Cadmium 1000ppm Standard Solution 500ml £15.00 Cadmium 1000ppm Standard Solution 500ml (£15.00)

Related Products

Cadmium Ionic Strength Adjustment Buffer (ISAB) 500ml

Cadmium Ionic Strength Adjustment Buffer (ISAB) 500ml

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£25.00

Cadmium 1000ppm Standard Solution 500ml

Cadmium 1000ppm Standard Solution 500ml

EDT direction produce a wide range of stock standards to ensure that ISE calibration is both simple,..

£15.00

Direct Readout Bench pH/Ion Meter & Accessories

Direct Readout Bench pH/Ion Meter & Accessories

The DR359Tx is a straightforward Ion Meter with the ability to measure Ion concentration using up to..

£670.00

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960