Here are some of the benefits of using EDT direction Combination Ion Selective Electrodes: 

  • Rugged Solid State Sensors
  • No Filling solutions
  • No membrane replacements
  • Built in dry Reference electrode
  • Waterproof and submersible
  • Suitable for Laboratory and Field work
  • Compatible with all pH and Ion Meters
  • Stored dry for long lifetime
  • Low cost
  • Easy to use

The Carbonate sensor is PVC based with a solid state mount and does not degenerate during storage unlike conventional Carbonate electrodes. The lack of internal solution means that submersion is also possible as the sensor does not flex under reasonable pressure.

Each EDT directION Combination ISE has a 1 metre cable and a BNC connector (other connectors available on request) allowing use on all types of pH/ION meter including laboratory bench and research models. For direct concentration reading and absolute simplicity the EDT DR359TX pH/ION meter is the perfect instrument for these ISEs.

The solid state sensors have a huge advantage over conventional ISEs in that there is no internal fill solution to degenerate the sensor this means that EDT direction combination ISEs have an unrivalled lifetime and a very low cost of ownership.

EDT are a UK based manufacturer and produce ISEs for many prominent companies in the water testing sector. As a result our ISEs are very competitively priced and come complete with technical support provided from our vast library of applications and our in house electrochemistry technicians.

For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs). Click here to see a simple calibration procedure or learn more about the principles of ISE measurement

Thumb File information
3091_Manual.pdf 1.58MB 185
Combination ISE Brochure.pdf 1.58MB 199
Accessories
Cable length 1000mm
Cap Diameter 16mm
Commodity Code 90279050
Concentration Range 0.008-80 ppm
Connector BNC
Diameter 12mm
Endpoint time Typically 10-60 seconds
Interferences Acetate, Thiocyanate
length 155mm
pH range 6.6-9.6 pH
Potential Drift 2mV per Day
Reference Type Double Junction
Resistance at 25 Deg C < 2.5 MOhm
Temperature range 5-50 Degrees C

Write a review

Note: HTML is not translated!
    Bad           Good

Carbonate Combination ISE

  • £295.00



Recommended Essentials

Carbonate 1000ppm Standard Solution 500ml £15.00 Carbonate 1000ppm Standard Solution 500ml (£15.00)
Carbonate Ionic Strength Adjustment Buffer (ISAB) 500ml £25.00 Carbonate Ionic Strength Adjustment Buffer (ISAB) 500ml (£25.00)

Related Products

Carbonate 1000ppm Standard Solution 500ml

Carbonate 1000ppm Standard Solution 500ml

EDT direction produce a wide range of stock standards to ensure that ISE calibration is both simple,..

£15.00

Carbonate Ionic Strength Adjustment Buffer (ISAB) 500ml

Carbonate Ionic Strength Adjustment Buffer (ISAB) 500ml

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£25.00

Direct Readout Bench pH/Ion Meter & Accessories

Direct Readout Bench pH/Ion Meter & Accessories

The DR359Tx is a straightforward Ion Meter with the ability to measure Ion concentration using up to..

£670.00

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960