The new IQ ProcessLab pHcontroller accept rugged non-glass ISFET sensorr probes as well as traditional glass electrodes. Designed for continuous process monitoring applications, the waterproof processLab controlleris an extraordinarily powerful instrument with easily configurable relay and analogue outputs. Menus in plain language make set-up and operation simple.
The extra large backlit LCD displayprovides crisp viewing even in low lightand the status of all relaysand outputsis visible at a glance.
Specifications
Range 0.00 to 14.00 pH, ±999.9 mV, -5 to +105º C
Resolution 0.01 pH, 0.1 mV, 0.1º C
Accuracy ±0.02 pH, ±0.5 mV, ±0.5 º C
Calibration one point or two point (calibrate single point to any pH value),
Automatic buffer recognition 1.68, 2.00, 4.00, 4.01, 6.86, 7.00, 9.18, 10.00, 10.01, 12.00, 12.45
ATC -5 to 105 º C: three or 4 conductor Pt 1000 RTD
Manual TC (glass pH only) -5 to +105º C
Display 5-1/2" 360 x 240 pixel LCD with LED backlight
Enclosure NEMA 4X (IP67) waterproof polycarbonate
Relays Four Electromechanical SPDT contacts. UL rated 5A 115/230
. VAC, 5A at 30 VDC resistive. Each relay can be driven by the measured pH, mV, or temperature
Relay Op Modes Each relay can be set for ON/OFF, Pulse Length, Pulse requency, .. or Alarm Mode. Control settings for high/low phasing, setpoint, .. deadband, overfeed timer, on delay, off delay. Alarm settings for .. high/low alarm point, high/low deadband, on delay, off delay
Analog Outputs Four optically isolated 0/4-20 mA outputs. Each output can be driven by pH, mV, or temperature
Operating Temp (Controller) -4 to +140ºF (-20 to +60º C)
Power 10-230VAc. 50/60 HZ. No jumper or switch settings necessary Battery Backup Built-in lithium back-up battery
Dimensions 11"W x 9"H x 3.5"D (280mm x 152mm x 89mm)
Net Weight 3.5 lbs
