EDT directION mini Ion selective electrodes are rugged solid state sensors that can be used in

conjunction with any reference electrode half cell to make a complete Ion sensor.

These mini ISEs are the sensing component of the half cell and Combination ISE's produced by

EDT directION and can be used to build your own ISE to suit your application. They can also be

used as a Micro alternative to 12mm half cell. Micro reference half cells are available on request.

There are two basic sensor constructions: PVC on a solid state substrate and Crystal membrane

with a solid state contact. The Bromide mini ISE is a Crystalline electrode and therefore maybe

polished and cleaned as the electrode gets older. 

The lack of internal solution means that lifetime is enhanced and submersion is possible as the sensor

does not flex under reasonable pressure.

The solid state sensors have a huge advantage over conventional ISEs in that there is no internal

fill solution to degenerate the sensor this means that EDT direction mini ISEs have an un-rivalled

lifetime and a very low cost of ownership.

For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs).

The Technical specification is identical to the Half cell equivalent Cat. No. 1271

For Quick Ion analysis for under £500 use our ION Concentration Calculator.

Thumb File information
Mini ISEs.pdf 311.74KB 611
Accessories
Body Type PVC Body. Crystalline Membrane
Cable length 140mm. Free Wire Ends
Commodity Code 90279050
Connector Compatible with all Connectors
Diameter 7
Height 8

Write a review

Note: HTML is not translated!
    Bad           Good

Bromide Mini ISE

  • £115.00



Recommended Essentials

Bromide Ionic Strength Adjustment Buffer (ISAB) 500ml £30.00 Bromide Ionic Strength Adjustment Buffer (ISAB) 500ml (£30.00)
Bromide 1000ppm Standard Solution 500ml £20.00 Bromide 1000ppm Standard Solution 500ml (£20.00)
Double Junction Reference Electrode (Ag/AgCl) £74.00 Double Junction Reference Electrode (Ag/AgCl) (£74.00)

Related Products

Bromide Ionic Strength Adjustment Buffer (ISAB) 500ml

Bromide Ionic Strength Adjustment Buffer (ISAB) 500ml

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£30.00

Bromide 1000ppm Standard Solution 500ml

Bromide 1000ppm Standard Solution 500ml

EDT direction produce a wide range of stock standards to ensure that ISE calibration is both simple,..

£20.00

Double Junction Reference Electrode (Ag/AgCl)

Double Junction Reference Electrode (Ag/AgCl)

A glass bodied reference electrode half-cell with a 12mm body. Double Junction reference electrodes ..

£74.00

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960