EDT directION manufacture a range of conductivity calibration solutions to enable the successful and accurate calibration of our conductivity meters and electrodes.

The measurement of conductivity requires that the sample be aqueous and to be of adequate volume to cover the electrode surfaces. It is important that if the samples and standards are not of the same temperature then temperature compensation is required.

Conductivity increases approximately 2% per degree centigrade. Normally the conductivity calibration is carried out on one point. One useful check is that the conductivity in air should be zero as there is no conductive material between the electrodes.

EDT direction conductivity standards are Potassium Chloride solutions in either 100ml or 500ml sealed plastic bottles. For correct use the appropriate volume of standard should be poured into a clean beaker or container. Do not calibrate by placing the conductivity cell in the bottle as this will contaminate the solution. Following calibration remember to close the bottle to avoid evaporation or contamination and do not pour the used standard back into the bottle.

Calibration Video Coming Soon

Thumb File information
Conductivity Calibration Solutions.pdf 341.17KB 738
MSDS Conductivity Standard A3053.pdf 1.4MB 992
Accessories
Commodity Code 25010051
Contents Analytical Grade Potassium Chloride and Deionised Water
Diameter 67mm
Filled Weight 510g
Height 195mm
Material HDPE (High Density Poly Ethylene)
Tamper Proof Cap Yes
Volume 500ml

Write a review

Note: HTML is not translated!
    Bad           Good

Conductivity Calibration Solution 1413µS/cm 500ml

  • £24.00



Recommended Essentials

Glass Conductivity Cell K=1 £93.00 Glass Conductivity Cell K=1 (£93.00)
Conductivity Calibration Solution 12.88mS/cm 100ml £12.00 Conductivity Calibration Solution 12.88mS/cm 100ml (£12.00)

Related Products

Epoxy Conductivity Dip Cell K=1

Epoxy Conductivity Dip Cell K=1

The A5010 Epoxy Conductivity Cell is for general purpose dip applications and is ideal for general l..

£187.00

Glass Conductivity Cell 12mm K=1

Glass Conductivity Cell 12mm K=1

The E8071 Glass Conductivity Cell is for general purpose dip applications and is ideal for general l..

£86.00

Conductivity Low Volume (200 microlitre) Flow Cell with ATC

Conductivity Low Volume (200 microlitre) Flow Cell with ATC

The A6000/ATC Polymer Bodied Conductivity Cell is for continuous flow applications and is ideal for ..

£374.00

Glass Conductivity Cell K=0.1 Mini DIN Connector

Glass Conductivity Cell K=0.1 Mini DIN Connector

The E8075 Glass Conductivity Cell is for dip applications where the sample conductivity is low and t..

£96.00

Glass Conductivity Cell K=1 Mini DIN Connector

Glass Conductivity Cell K=1 Mini DIN Connector

The E8074 Glass Conductivity Cell is for general purpose dip applications and is ideal for general l..

£93.00

Tags: Solution, Standard, Conductivity

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960