Conductivity Standards & Solutions

Product Type: Standards and Solutions

Standards and Solutions

Conductivity standards and solutions from EDT DirectION are a full range of control standards for your electrochemistry analysis requirements.
Every conductivity measurement requires a calibration standard solution to ensure accuracy and precision.

One point calibration can be performed in Air however a further point is required using a known standard prepared from Analar Potassium Chloride. Once used the standard needs to be discarded as they are easily contaminated and increase in conductivity on evaporation.


Product Compare (0)


Conductivity Calibration Solution 12.88mS/cm 100ml

Conductivity Calibration Solution 12.88mS/cm 100ml

EDT directION manufacture a range of conductivity calibration solutions to enable the successful and..

£12.00

Conductivity Calibration Solution 12.88mS/cm 500ml

Conductivity Calibration Solution 12.88mS/cm 500ml

EDT directION manufacture a range of conductivity calibration solutions to enable the successful and..

£24.00

Conductivity Calibration Solution 1413µS/cm  100ml

Conductivity Calibration Solution 1413µS/cm 100ml

EDT directION manufacture a range of conductivity calibration solutions to enable the successful and..

£12.00

Conductivity Calibration Solution 1413µS/cm 500ml

Conductivity Calibration Solution 1413µS/cm 500ml

EDT directION manufacture a range of conductivity calibration solutions to enable the successful and..

£24.00

Salcon II Standard

Salcon II Standard

The Salcon II Standard solution is the only standard solution needed to calibrate the SALCON II Mete..

£27.00

Showing 1 to 5 of 5 (1 Pages)