The E5010 Epoxy Conductivity Cell is for general purpose dip applications and is ideal for general laboratory , field and industrial measurements over the range of 100uS/cm to 100mS/cm or where glass is not acceptable e.g. food processing.

The 25mm diameter rugged Epoxy body has two internal active carbon electrodes which have to be submerged in the samples. The E5010 Conductivity cell is suitable for use with the QP481 and QP458  Portable Meters only and contains a temperature sensor to enable all readings to be temperature compensated (ATC). For other 

Calibration solutions are available and the recommendation for general purpose cells (K=1) is to calibrate using a 1413uS/cm standard such as EDT A3052and A3053.

Temperature reading and compensation range is 0-50 degrees centigrade. For accurate analysis below 10uS/cm use a K=0.1 cell (E8072). For process measurements or where larger industrial units are required see our complete range of Conductivity cells which will suit most applications.

The E5010 Conductivity cell has a fixed 1 metre cable with a Mini DIN connector* to fit The QP range meters. EDT directION also manufacture conductivity cells compatible with most models and make of instrument. Contact us so we can advise the part number and price.

*The A5010 Conductivity Cell has a standard DIN connector for use with EDT Series 2 & Series 3 Conductivity meters.

Accessories
Body Type Epoxy Body
Cell Constant K=1
Cell Type Carbon Plates
Commodity Code 90279050
Connector Mini DIN connector for EDT direction QP Series Meters
Diameter Dip Cell diameter 25mm
length 300mm

Write a review

Note: HTML is not translated!
    Bad           Good

Epoxy Conductivity Dip Cell K=1 Mini DIN Connector

  • £175.00


Related Products

Conductivity Calibration Solution 12.88mS/cm 500ml

Conductivity Calibration Solution 12.88mS/cm 500ml

EDT directION manufacture a range of conductivity calibration solutions to enable the successful and..

£20.00

Series 4 Portable Combined pH and Conductivity /TDS Meter

Series 4 Portable Combined pH and Conductivity /TDS Meter

The QP458 Portable combined pH and Conductivity meter is the third in a series of Quality Portable m..

£495.00

Series 4 Portable Conductivity/TDS Meter Kit

Series 4 Portable Conductivity/TDS Meter Kit

The QP481 Portable Conductivity/TDS meter is the second in a series of Quality Portable meters from..

£395.00

Tags: Conductivity Cell, Epoxy, Dip Cell, Mini DIN

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960