The A5010 Epoxy Conductivity Cell is for general purpose dip applications and is ideal for general laboratory , field and industrial measurements over the range of 100uS/cm to 100mS/cm or where glass is not acceptable e.g. food processing.
The 25mm diameter rugged Epoxy body has two internal active carbon electrodes which have to be submerged in the samples. The A5010 Conductivity cell is suitable for use with the complete range of EDT conductivity meters (except the Series 4 QP range which uses E5010) and contains a temperature sensor to enable all readings to be temperature compensated (ATC).
Calibration solutions are available and the recommendation for general purpose cells (K=1) is to calibrate using a 1413uS/cm standard such as EDT A3052and A3053.
Temperature reading and compensation range is 0-50degrees centigrade. For accurate analysis below 10uS/cm use a K=0.1 cell (E8072). For process measurements or where larger industrial units are required see our complete range of Conductivity cells which will suit most applications.
The A5010 Conductivity cell has a fixed 1 metre cable with a DIN connector to fit EDT meters. EDT directION also manufacture conductivity cells compatible with most models and make of instrument. Contact us so we can advise the part number and price.
To watch a simple calibration click here.
|E5010.pdf File Size 1.79MB Downloaded: 854|
|Body Type||Epoxy Body|
|Cell Type||Carbon Plates|
|Conductivity Cell Range||100µS-100mS|
|Connector||DIN Connector for EDT Conductivity Meters|
Epoxy Conductivity Dip Cell K=1
- Brand: EDT directION Limited
- Product Code: A5010
- Availability: In Stock