These Sensors are ideal for Flow Injection Analysis (FIA) or any constant or continuous monitoring application. Measurements can be made in Zero flow or in stop/flow or static measurements 

  • Zero dead volume 
  • Solid state 
  • Fast response
  • Long lifetime
  • Unlimited shelf life 

The Chloride sensor is in the form of a small solid state Acrylic block with a bore diameter of 2.3 mm. A flow through reference is required for operation (cat no 4001).

These small ISEs have exactly the same specifications as the standard Chloride ISE (cat no 1261) but has further advantages such as: Zero dead Volume, Large sample contact area, low sample volume (min 50 microliters), easy cleaning.

The EDT 4261 Flow cell has unlimited shelf life. Supplied with O rings, 1 metre cable with BNC connector.

Requires reference flow cell (cat. 4001), flow cell holder (Cat 4443). Tubing and pump not supplied.

The EDT flowcell holders are constructed from Aluminium with Stainless steel fittings. Standard holders accept 1,2or 3 modules plus a reference flowcell EDT direction produce standard solutions and ISABs for all ISE analysis. 

Specification is the same as Chloride Half cell ISE Cat no. 1261.  

Thumb File information
Flowcell ISE Brochure.pdf 1.9MB 206
Accessories
Bore Diameter 2.3mm
Commodity Code 90279050
Connector 2mm Pin
Dead Volume Zero
Flowcell Width 9mm
Material Acrylic
Minimum Cell Volume 50 Microlitres. (200 with reference)

Write a review

Note: HTML is not translated!
    Bad           Good

Chloride Flowcell ISE

  • £305.00



Recommended Essentials

Chloride Ionic Strength Adjustment Buffer (ISAB) 500ml £25.00 Chloride Ionic Strength Adjustment Buffer (ISAB) 500ml (£25.00)
Chloride 1000ppm Standard Solution 500ml £15.00 Chloride 1000ppm Standard Solution 500ml (£15.00)

Related Products

Reference Electrode Flowcell

Reference Electrode Flowcell

The EDT directION 4001 Reference Electrode is designed for use with the ISE flowcells for Nitrate, A..

£195.00

Chloride Ionic Strength Adjustment Buffer (ISAB) 500ml

Chloride Ionic Strength Adjustment Buffer (ISAB) 500ml

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£25.00

Chloride 1000ppm Standard Solution 500ml

Chloride 1000ppm Standard Solution 500ml

EDT direction produce a wide range of stock standards to ensure that ISE calibration is both simple,..

£15.00

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960