Here are some of the benefits of using EDT direction Combination ISE's:

  • Rugged Solid State Sensors
  • No Filling solutions
  • No membrane replacements
  • Built in dry Reference electrode
  • Waterproof and submersible
  • Suitable for Laboratory and Field work
  • Compatible with all pH and Ion Meters
  • Stored dry for long lifetime
  • Low cost
  • Easy to use

The Fluoride sensor is Crystal based with a solid state mount and does not degenerate during storage unlike conventional Fluoride electrodes.

Each EDT directION Combination ISE has a 1 metre cable and a BNC connector (other connectors available on request) allowing use on all types of pH/ION meter including laboratory bench and research models. For direct concentration reading and absolute simplicity the EDT DR359TX pH/ION meter is the perfect instrument for these ISEs.

For Quick Ion analysis for under £500 use our ION Concentration Calculator (mV Meter Required).

The solid state sensors have a huge advantage over conventional ISEs in that there is no internal fill solution to degenerate the sensor this means that EDT direction combination ISEs have an unrivalled lifetime and a very low cost of ownership.

EDT are a UK based manufacturer and produce ISEs for many prominent companies in the water testing sector. As a result our ISEs are very competitively priced and come complete with technical support provided from our vast library of applications and our in house electrochemistry technicians.

For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs). Learn more about the principles of ISE measurement in our technical support area.




Thumb File information
Combination ISE Range Brochure.pdf 1.63MB 93
3221 Fluoride ISE Manual.pdf 1.7MB 147
Accessories
Body Type Epoxy Body.
Cable length 1000mm
Cap Diameter 16mm
Commodity Code 90278017
Concentration Range 0.02 to 1900ppm
Connector BNC
Diameter 12mm
Endpoint time Typically 30 seconds
Interferences Hydroxide Ions
length 155mm
pH range 4-8pH
Potential Drift Up to 2mV per 8 hours.
Reference Type Single Junction
Resistance at 25 Deg C <2.5 MOhm
Slope -54 to -59 mV per Decade
Temperature range 5 to 50 degrees C

Write a review

Note: HTML is not translated!
    Bad           Good

Fluoride Combination ISE

  • £330.00


Related Products

Fluoride Flow Plus Combination ISE

Fluoride Flow Plus Combination ISE

The EDT directION Flow plus range incorporates two solid state ISE’s in one 12 mm Epoxy body. One a..

£435.00

QP459 Portable ION/Dissolved Oxygen Meter

QP459 Portable ION/Dissolved Oxygen Meter

The QP459 Portable Ion Meter is dedicated to the measurement of ions in water. It's Du..

£495.00

Fluoride Standard Solution 1000ppm (500ml)

Fluoride Standard Solution 1000ppm (500ml)

EDT directION produce a wide range of stock standards to ensure that ISE calibration is both simple ..

£20.00

Tags: Electrode, ISE, Fluoride

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960