EDT directION mini Ion selective electrodes are rugged solid state sensors that can be used in

conjunction with any reference electrode half cell to make a complete Ion sensor.

These mini ISEs are the sensing component of the half cell and Combination ISE's produced by

EDT directION and can be used to build your own ISE to suit your application. They can also be

used as a Micro alternative to 12mm half cell. Micro reference half cells are available on request.

There are two basic sensor constructions: PVC on a solid state substrate and Crystal membrane

with a solid state contact. The Fluoride mini ISE is of Crystalline structure and may be polished and

cleaned as the electrode gets older. Cleaning the membrane with Methanol is usually sufficient.

The lack of internal solution means that lifetime is enhanced and submersionis possible as the

sensor does not flex under reasonable pressure.

The solid state sensors have a huge advantage over conventional ISEs in that there is no internal

fill solution to degenerate the sensor this means that EDT direction mini ISEs have an un-rivalled

lifetime and a very low cost of ownership.

For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs).

The technical specification is the same as the half cell equivalent Cat. No. 1221.

For Quick Ion analysis for under £500 use our ION Concentration Calculator.

Thumb File information
Mini ISEs.pdf 528.32KB 277
Accessories
Body Type PVC Body. Crystalline Membrane
Cable length 140mm
Commodity Code 90279050
Connector Free wire ends. Able to be attached to any connector.
Diameter 7mm
Height 8mm

Write a review

Note: HTML is not translated!
    Bad           Good

Fluoride Mini ISE Module

  • £105.00



Recommended Essentials

Fluoride Total Ionic Strength Adjustment Buffer (TISAB) 500ml £25.00 Fluoride Total Ionic Strength Adjustment Buffer (TISAB) 500ml (£25.00)
Fluoride Standard Solution 1000ppm (500ml) £15.00 Fluoride Standard Solution 1000ppm (500ml) (£15.00)
Double Junction Reference Electrode (Ag/AgCl) £69.00 Double Junction Reference Electrode (Ag/AgCl) (£69.00)

Related Products

Fluoride Total Ionic Strength Adjustment Buffer (TISAB) 500ml

Fluoride Total Ionic Strength Adjustment Buffer (TISAB) 500ml

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£25.00

Fluoride Standard Solution 1000ppm (500ml)

Fluoride Standard Solution 1000ppm (500ml)

EDT directION produce a wide range of stock standards to ensure that ISE calibration is both simple ..

£15.00

Double Junction Reference Electrode (Ag/AgCl)

Double Junction Reference Electrode (Ag/AgCl)

A glass bodied reference electrode half-cell with a 12mm body. Double Junction reference electrodes ..

£69.00

Tags: Electrode, ISE, Mini ISE, Fluoride

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960