EDT directION mini Ion selective electrodes are rugged solid state sensors that can be used in
conjunction with any reference electrode half cell to make a complete Ion sensor.
These mini ISEs are the sensing component of the half cell and Combination ISE's produced by
EDT directION and can be used to build your own ISE to suit your application. They can also be
used as a Micro alternative to 12mm half cell. Micro reference half cells are available on request.
There are two basic sensor constructions: PVC on a solid state substrate and Crystal membrane
with a solid state contact. The Ammonium Mini ISE is of PVC construction and is less prone to oxidation
and can be rinsed after use but cannot be polished.
The lack of internal solution means that lifetime is enhanced and submersion
is possible as the sensor does not flex under reasonable pressure.
The solid state sensors have a huge advantage over conventional ISEs in that there is no internal
fill solution to degenerate the sensor this means that EDT direction mini ISEs have an un-rivalled
lifetime and a very low cost of ownership.
For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs).
The full technical specification is the same as the half cell equivalent. (Cat no 1051).
|Mini ISEs.pdf File Size 528.32KB Downloaded: 458|
|Body Type||PVC Body. PVC Membrane|
|Cable length||140mm. Can be attached to any connector|
|Connector||Free wire Ends|
Ammonium Mini ISE
- Brand: EDT directION Limited
- Product Code: 2051
- Availability: In Stock