The EDT directION Flow plus range incorporates two solid state ISE’s in one 12 mm Epoxy body. One acts as the Sensor whilst the other is incorporated into the reference system.  Watch Set up Video

Flow plus combination ISE's do not require a separate reference electrode, making it convenient to use with small sample volumes. The sensor and reference are solid state which ensures a longer shelf life than any other type of ISE.

The reference half-cell has a free-flowing liquid junction which will reduce drift and provide more stable readings than conventional ISE’s. Flow plus electrodes are ideal for measuring awkward or dirty samples, which would clog conventional reference electrodes.

Flow plus ISEs require a filling solution. Approximate capacity of the reference chamber is 3ml.The Flow plus reference system has a liquid junction provided by a conical plug which is opened or closed by rotation of the electrode cap. The wider the opening between body and plug the faster the electrolyte flows.

Low ionic strength samples and samples with high viscosity or particulates are examples of media that require this increased flow. Flow plus ISEs are ideal in situations where drift, slow response times and reduced electrode lifetimes are a problem.

Each EDT directION Flow plus ISE has a 1 metre cable and a BNC connector (other connectors available on request) allowing use on all types of pH/ION meter including laboratory bench and research models. For direct concentration reading and absolute simplicity the EDT DR359TX pH/ION meter is the perfect instrument for these ISEs.

For Quick Ion analysis for under £500 use our ION Concentration Calculator.

EDT are a UK based manufacturer and produce ISEs for many prominent companies in the water testing sector. As a result our ISEs are very competitively priced and come complete with technical support provided from our vast library of applications and our in house electrochemistry technicians.

For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs). Click here to see a simple calibration procedure or learn more about the principles of ISE measurement



Thumb File information
5021 Nitrate Flow Plus Manual.pdf 1.54MB 307
flow-plus-ises.pdf 1.41MB 793
Accessories
Cable length 1000mm
Cap Diameter 16mm
Commodity Code 90279050
Concentration Range 0.4-62,000 ppm
Connector BNC
Diameter 12mm
Endpoint time Typically 10-60 seconds
Interferences Chloride, Nitrite
length 155mm
pH range 2-11 pH
Potential Drift 2mV per Day
Reference Type Liquid Junction
Resistance at 25 Deg C < 2.5 MOhm
Temperature range 5-50 Degrees C

Write a review

Note: HTML is not translated!
    Bad           Good

Nitrate Flow Plus Combination ISE

  • £435.00


Related Products

Nitrate Ionic Strength Adjustment Buffer (ISAB) 500ml

Nitrate Ionic Strength Adjustment Buffer (ISAB) 500ml

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£30.00

Nitrate Flow Plus Filling Solution 30ml

Nitrate Flow Plus Filling Solution 30ml

Filling solution for use with the 5021 Nitrate Flowplus ISE.Solution supplied in a 30ml bottle ..

£16.00

Tags: Electrode, ISE, Combination, Flow Plus, Nitrate

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960