The E8052 Stainless Steel Temperature probe is for use with the FE253 pH meter and is connected via the 3.5mm Jack socket on the front panel.

The Temperature probe measures to within +/- 0.1 degrees centigrade over the full 0-100 degree range. 

It is important to measure the temperature during pH analysis. If the temperature of the buffer solutions is different to that of the standards then temperature correction is required. Automatic or manual temperature compensation is available on most pH meters.

The buffer solution temperature should also be noted as the actual pH will change with temperature. In this case the actual pH has to be inputted into the calibration. e.g.  pH7 buffer solution is pH7.00 at 25 degrees but is pH7.02 at 20 degrees C.

The E8052 fits into the E8060 electrode stand and should be rinsed between measurements. 

Commodity Code 90278011
Diameter 3mm
Material Stainless Steel
Temperature Accuracy +/- 0.1 Degree C
Temperature range 0-100 Degrees C

Write a review

Note: HTML is not translated!
    Bad           Good

Temperature Probe

  • £61.00

Recommended Essentials

Portable pH Meter  £225.00 Portable pH Meter (£225.00)
Buffer Solution pH 7 (Yellow) 500ml £15.00 Buffer Solution pH 7 (Yellow) 500ml (£15.00)

Related Products

Portable pH Meter

Portable pH Meter

The FE253 is a compact battery operated instrument designed to give the same reliability and accurac..


Buffer Solution pH 7 (Yellow) 500ml

Buffer Solution pH 7 (Yellow) 500ml

Buffer Solutions are required to calibrate the pH Meter/Electrode system.  Manufactured an..


Tags: Probe, Temperature, ATC

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960