The E8050 Stainless Steel Temperature probe is for use with the GP353, GP383 and GP353R pH and Redox meters and is connected via the DIN socket on the rear panel.

The Temperature probe measures to within +/- 0.1 degrees centigrade over the full 0-100 degree range. 

It is important to measure the temperature during pH analysis. If the temperature of the buffer solutions is different to that of the standards then temperature correction is required. Automatic or manual temperature compensation is available on most pH meters.

The buffer solution temperature should also be noted as the actual pH will change with temperature. In this case the actual pH has to be inputted into the calibration. e.g.  pH7 buffer solution is pH7.00 at 25 degrees but is pH7.02 at 20 degrees C.

The E8050 fits into the E8060 electrode stand and should be rinsed between measurements. 

Accessories
Cap Diameter 16mm
Commodity Code 90278011
Diameter 3mm
length 155mm
Material Stainless Steel
Temperature Accuracy +/- 0.1 Degree C
Temperature range 0-100 Degrees C

Write a review

Note: HTML is not translated!
    Bad           Good

Temperature Probe

  • £61.00



Recommended Essentials

General Purpose Bench  pH Meter & Accessories £335.00 General Purpose Bench pH Meter & Accessories (£335.00)

Related Products

General Purpose Bench  pH Meter & Accessories

General Purpose Bench pH Meter & Accessories

The GP353 General purpose pH meter pH is a high quality durable bench instrument with traditional ro..

£335.00

Tags: Probe, Temperature

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960