Here are some of the benefits of using EDT direction Combination Ion Selective Electrodes:

  • Rugged Solid State Sensors
  • No Filling solutions
  • No membrane replacements
  • Built in dry Reference electrode
  • Waterproof and submersible
  • Suitable for Laboratory and Field work
  • Compatible with all pH and Ion Meters
  • Stored dry for long lifetime
  • Low cost
  • Easy to use

The Cyanide Sensor is a crystalline material which can be polished when the slope decreases with use. This will rejuvenate the sensor and give a longer lifetime. The sensor should be stored dry with its protective cap on.

Each EDT directION Combination ISE has a 1 metre cable and a BNC connector (other connectors available on request) allowing use on all types of pH/ION meter including laboratory bench and research models. For direct concentration reading and absolute simplicity the EDT DR359TX pH/ION meter is the perfect instrument for these ISEs.

For Quick Ion analysis for under £500 use our ION Concentration Calculator (mV Meter Required).

The solid state sensors have a huge advantage over conventional ISEs in that there is no internal fill solution to degenerate the sensor this means that EDT direction combination ISEs have an unrivalled lifetime and a very low cost of ownership.

EDT are a UK based manufacturer and produce ISEs for many prominent companies in the water testing sector. As a result our ISEs are very competitively priced and come complete with technical support provided from our vast library of applications and our in house electrochemistry technicians.

For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs). Click here to see a simple calibration procedure or learn more about the principles of ISE measurement






Thumb File information
Combination ISE Range Brochure.pdf 1.63MB 740
3291 Cyanide Combination ISE Manual.pdf 1.63MB 1119
Accessories
Cable length 1000mm
Cap Diameter 16mm
Commodity Code 90279050
Concentration Range 0.03-260 ppm
Connector BNC
Diameter 12mm
Endpoint time Typically 10-60 seconds
Interferences Sulphide, Bromide, Iodide
length 155mm
pH range 11-13 pH
Potential Drift 2mV per Day
Resistance at 25 Deg C < 2.5 MOhm
Temperature range 5-50 Degrees C

Write a review

Note: HTML is not translated!
    Bad           Good

Cyanide Combination ISE

  • £330.00


Related Products

Cyanide Ionic Strength Adjustment Buffer (ISAB) 500ml

Cyanide Ionic Strength Adjustment Buffer (ISAB) 500ml

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£30.00

Cyanide Half Cell ISE

Cyanide Half Cell ISE

The EDT directION Cyanide Half Cell ion selective electrode has a solid state Crystalline membrane. ..

£215.00

QP459 Portable ION/Dissolved Oxygen Meter

QP459 Portable ION/Dissolved Oxygen Meter

The QP459 Portable Ion Meter is dedicated to the measurement of ions in water. It's Du..

£495.00

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960