Redox Testing
Product Type: Redox Testing
-80x80.jpg)
REDOX meters measure in millivolts (mV).
Most applications will only require 1mV resolution but in some cases a or 0.1mV resolution is required. EDT directION have a meter for every application.
All results are relative so calibration is not normally possible however for most applications a benchmark sample is usually available. Taking a mV measurement of this will provide a target value.
Electrode selection usually comes down to whether you need a filed or laboratory electrode. Choose from the selection below.
Cathodic Protection Reference Electrode
The Cathodic Protection Reference Electrode from EDT directION is a Silver /Silver Chloride Referenc..
£98.00
Boat Corrosion and REDOX Meter
The QP999 Boat Corrosion and REDOX Meter has both Boat Hull and Water REDOX modes and displays..
£199.00
Boat Meter Kit
The QP999 Boat Corrosion and REDOX Kit has both Boat Hull and Water REDOX modes and displays r..
£450.00
Glass Redox Combination Electrode
The E8106 is a glass Redox combination electrode with a refillable Ag/AgCl reference and platinum ro..
£103.00
Series 4 Portable Ion Meter
The QP459 Portable Ion Meter is the sixth in a series of Quality Portable meters from EDT ..
£295.00
Series 4 Portable pH Meter
The QP451 Portable pH meter is the first in a series of Quality Portable meters from EDT direct..
£295.00
Platinum REDOX sensor for Corrosion /Cathodic protection applications.
The Model 9999ORP sensor should be used in conjunction with the 9999 Cathodic protection reference e..
£98.00