The QP999 Boat Corrosion and REDOX  Kit has both Boat Hull and Water REDOX modes and displays results clearly on a backlit display. Monitoring your Hull potential lets you know the condition of your sacrificial anodes and the rate of corrosion of your hull. The Water REDOX readings will enable you to locate the source of corrosive conditions including Stray DC.

The purpose-built Meter has an automatic stability indicator which freezes the result when ready. This normally takes around 30 seconds. Simply store the result in the Boat Meters memory so that you can track the condition of your Hull or the local water conditions . Reviewing this data may help to decide when to replace your sacrificial anodes or to find the source of corrosion. The Micro USB output will allow you to dump the results directly into excel for easy reference and plotting the progress of the corrosion.

Features of the meter include:

  • Long Battery life of over 200 hours continuous use.
  • Easy to use
  • Clear display of the Accurate Hull Potential in mV
  • Automatic stability indicator which freezes the reading
  • Internal storage of your results.
  • Rugged splashproof construction
  • Powered by 4 x AA Batteries
  • Auto -off Battery life saver
  • Micro USB output to download data to Excel.
  • Boat Hull and Water REDOX Modes 

The Boat meter also has a WATER REDOX mode which , with the  Platinum REDOX Electrode allows the measurement of the Corrosion potential of the water. This is useful in Marinas or any waterway to locate areas of corrosive water. This includes the ability to locate the source or proximity of stray DC.

Water potential can also be tested to help detect if there is any extra activity in the water that could accelerate hull corrosion such as stray DC current. 

The Kit includes:  QP999 Boat Meter, 9999 Reference electrode, Cable (5m) with Crocodile clip, Platinum Water Redox probe, Carry Case, Batteries.




Thumb File information
Boat Meter Manual.pdf 1.55MB 197
Meters
Accuracy Resolves to +/- 1 mV
Battery Life 250 hours continuous use. Auto switch off and Power saving options.
Commodity Code 90278011
Connection
Data Output Mini USB. Outputs csv. 38400 Baud
Data Storage Dynamic storage of up to 64 Data files. Logging maximum 10,000 data points.
Dimensions 175 x 88 x 48mm. Meter Only
Power requirement 4 x AA Battery
Range mV +/- 1999 mV
Warranty 2 Year Warranty. Excludes Electrodes accessories and consumables and Misuse. Electrode Warranty 6 Months

Write a review

Note: HTML is not translated!
    Bad           Good

Boat Meter Kit

  • £499.00



Recommended Essentials

Data Kit For Series 4 Portable Meters £16.00 Data Kit For Series 4 Portable Meters (£16.00)
Rubber Boot/Stand For Series 4 Instruments £30.00 Rubber Boot/Stand For Series 4 Instruments (£30.00)

Related Products

Data Kit For Series 4 Portable Meters

Data Kit For Series 4 Portable Meters

This data kit is required to enable data stored in the internal memory on the QP451,481,458 and SAL..

£16.00

Rubber Boot/Stand For Series 4 Instruments

Rubber Boot/Stand For Series 4 Instruments

The RB400 is Silicone Rubber boot that protects the Series 4 Instruments from wear and damage when ..

£30.00

Tags: Series 4

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960