The EDT directION 4001 Reference Electrode is designed for use with the ISE flowcells for Nitrate, Ammonium, Chloride, Potassium and Calcium. This electrode has a 2.3mm bore and is not suitable for use with the Fluoride flowcell which requires Cat Number 4001/1.2.

The Reference cell is slotted into the 2 or 3 place flowcell holder with an ISE to make a working electrode system. It incorporates an Ag/AgCl reference refillable at the top of the cell by peeling back the label and revealing the fill hole.

Connection to the Ion Meter is made via a 1mm pin at the top of the electrode next to the fill hole. When configuring the flowcell holder it is important that the reference electrode is upstream. i.e. the first to come into contact with the standard and sample flow. This will ensure good integrity of contact between the cells. 

The reference junction is of porous Teflon and is resistant to blockage.

The reference is already supplied filled with Saturated KCl/AgCl filling solution and it is normal for some of the KCL to remain un-dissolved. This will not detract from the performance of the system.

For a complete system you will require a reference and ISE flowcell, a holder, a combination cable to a BNC connector and an Ion meter EDT model DR359TX.

Tubing and pump not supplied.




Thumb File information
Flow Cell ISE Brochure.pdf 1.91MB 915
Meters
Connection 2mm Pin (ref) or BNC for Combination with an ISE.
Accessories
Bore Diameter 2.3mm
Commodity Code 90279050
Dead Volume Zero
Flowcell Width 18mm
Material Acrylic

Write a review

Note: HTML is not translated!
    Bad           Good

Reference Electrode Flowcell

  • £210.00


Related Products

Chloride Flowcell ISE

Chloride Flowcell ISE

These Sensors are ideal for Flow Injection Analysis (FIA) or any constant or continuous monitoring a..

£330.00

Sodium PVC Flowcell

Sodium PVC Flowcell

ISE Flowcells from EDT direction are solid state, Zero dead volume sensors that can be used independ..

£330.00

Flowcell Holder for 3 Flowcells

Flowcell Holder for 3 Flowcells

The Model 4444 Flowcell holder accepts up to two ISE and one reference Flowcell.This holder is compa..

£104.00

Flowcell Cable

Flowcell Cable

The Flowcell cable is 1 metre in length with a BNC plug fitting for the meter/analyser.Designed for ..

£28.00

Tags: Electrode, Reference, Flowcell

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960