The SALCON II model is a robust direct reading instrument designed for use in the field or workshop/Laboratory to provide a direct % Chloride or % Salt content in Wash solutions, food and industrial products . The meter has a built in correction allowing for the use of Tap water as the blank solution by correcting automatically for its inherent conductivity.

British and European Standards.

Water soluble Chloride ion content requirements can be summarised in the European and British Standards BS EN 12620 and BS EN 206-1.

BS EN 206-1 defines the chloride class depending on the type of reinforcing to be used. The class specifies the maximum Chloride content in concrete by mass of cement from the total contribution of all the constituents.

The EDT SALCON II meter is designed to assist in the monitoring and management of the Chloride marine aggregate producers’ factory control procedures as required by BS EN 12620

The Meter has a Rubber protective boot and tough carry case included as standard. 

Features include:

·       Direct Concentration Readout down to 0.001% Chloride  (Reads % Salt to 0.001% NaCl) 

·       Automatic correction for Tap Water (Blank correction)

·       Auto Endpoint

·       Results storage in the Internal memory

·       Backlit display with Brightness and contrast control.

·       Automatic Temperature Correction (ATC)

·       Automatic Calibration using actual NaCl conductivity data.*

·       Portable with a 200 hour continuous battery life**

      The SALCON II Kit includes the Meter, RB400 Rubber Boot, E5019 Rugged Conductivity Cell, 4 x AA Batteries, 2 x 100ml Bottle, 500ml Salcon II Standard Solution. To see an unpacking video, click here.








Thumb File information
SALCON II Meter Brochure.pdf 1.19MB 253
Series 4 Brochure.pdf 1.78MB 274
SALCON II Manual.pdf 1.59MB 401
Meters
Chloride Concentration Direct Reading as % Chloride. Resolution 0.001% Range 0-30% (Saturation)
Data Logging Maximum data points 64,000. Log period 10 seconds to 99 hrs.59mins .59 secs Log interval minimum 1 second.
Salt Concentration Direct Reading as % NaCL. Resolution 0.001% Range 0-50% (Saturation)
Automatic Temperature Compensation (ATC) ATC across the entire range
Autoranging (Conductivity) Select the correct unit range Automatically.
Battery Life Over 200 Hours continuous use. Power saving features include: Auto off, Backlight control, logging sleep mode.
Commodity Code 90278011
Conductivity Accuracy +/- 0.2% of Reading
Conductivity Range Auto-ranging from 0- 999mS/cm. in appropriate units
Conductivity Resolution Resolves to 0.01uS/cm in the low range. Otherwise 4 Significant figures.
Connection Multi pin DIN for Conductivity/Temperature combined probe.
Data Output Mini USB. Outputs csv at 38400 Baud
Data Storage Dynamic Internal storage of up to 64 files. Logging maximum 10,000 data points
Display Backlit LCD Graphic Display
Power requirement 4 X AA Batteries
Reference Temperature Set at 25 degrees C.
Size 175x88x48mm (lwh). Meter Only
Temperature Coefficient Set at 2% Per degree.
Weight 350g Meter Only
Accessories
Temperature range -30 to +130 Degrees Centigrade

Write a review

Note: HTML is not translated!
    Bad           Good

Salcon II Salt Concentration Meter Kit

  • £495.00


Related Products

Conductivity Calibration Solution 1413µS/cm  100ml

Conductivity Calibration Solution 1413µS/cm 100ml

EDT directION manufacture a range of conductivity calibration solutions to enable the successful and..

£12.00

Conductivity Calibration Solution 12.88mS/cm 100ml

Conductivity Calibration Solution 12.88mS/cm 100ml

EDT directION manufacture a range of conductivity calibration solutions to enable the successful and..

£12.00

Carry Case for QP Series Instruments. Small

Carry Case for QP Series Instruments. Small

A Rugged Waterproof case with specific foam insert for the QP Series Portables.Rugged Polymer case w..

£52.00

Carry Case for QP Series instruments. Large

Carry Case for QP Series instruments. Large

A Rugged Waterproof case with specific foam insert for the QP Series Portables.Rugged Polymer case w..

£63.00

Glass Conductivity Cell K=1 Mini DIN Connector

Glass Conductivity Cell K=1 Mini DIN Connector

The E8074 Glass Conductivity Cell is for general purpose dip applications and is ideal for general l..

£93.00

Rubber Boot/Stand For Series 4 Instruments

Rubber Boot/Stand For Series 4 Instruments

The RB400 is Silicone Rubber boot that protects the Series 4 Instruments from wear and damage when ..

£30.00

Salcon II Standard

Salcon II Standard

The Salcon II Standard solution is the only standard solution needed to calibrate the SALCON II Mete..

£27.00

Polymer Conductivity Cell K=1 Mini DIN

Polymer Conductivity Cell K=1 Mini DIN

The E5019 Polymer Conductivity Cell is for general purpose dip applications and is ideal for general..

£85.00

Tags: Meter, Portable, Salt Concentration, Series 4

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960