ISE Flowcells from EDT direction are solid state, Zero dead volume sensors that can be used independently or positioned in series to create a multi-element sensor system. A reference flowcell is required for each set of flowcells.

  • Zero dead volume 
  • Solid state 
  • Fast response
  • Long lifetime
  • Unlimited shelf life 

The ideal flow rate is around 1-10ml per minute using a peristaltic pump. Nitrate flow cells have an ID  2.3mm.

These Sensors are ideal for Flow Injection Analysis (FIA) or any constant or continuous monitoring application. Measurements can be made in Zero flow or in stop/flow or static measurements 

The Sodium sensor is in the form of a small solid state Acrylic block with a bore diameter of 2.3 mm. A flow through reference is required for operation (cat no 4001).

These small ISEs have exactly the same specifications as the standard Sodium PVC ISE (cat no.1301) but has further advantages such as: Zero dead Volume, Large sample contact area, low sample volume (min 50 microliters), easy cleaning.

The EDT 4301 Sodium Flow cell has unlimited shelf life. Supplied with O rings, 1 metre cable with BNC connector.

Requires reference flow cell (cat. 4001), flow cell holder (Cat 4443). Tubing and pump not supplied.

The EDT flowcell holders are constructed from Aluminium with Stainless steel fittings. Standard holders accept 1,2or 3 modules plus a reference flowcell EDT direction produce standard solutions and ISAB's for all ISE analysis. 

Specification is the same as Sodium Half cell ISE Cat no. 1301. 

Accessories
Bore Diameter 2.3mm
Cable length 1000mm
Commodity Code 90279050
Connector 1mm pin to BNC or USB
Dead Volume Zero
Diameter 25mm
Material Acrylic body
Minimum Cell Volume 50 microlitres. (200 with reference)

Write a review

Note: HTML is not translated!
    Bad           Good

Sodium PVC Flowcell

  • £315.00



Recommended Essentials

Reference Electrode Flowcell £201.00 Reference Electrode Flowcell (£201.00)
Potassium Flowcell ISE £315.00 Potassium Flowcell ISE (£315.00)

Related Products

Reference Electrode Flowcell

Reference Electrode Flowcell

The EDT directION 4001 Reference Electrode is designed for use with the ISE flowcells for Nitrate, A..

£201.00

Potassium Flowcell ISE

Potassium Flowcell ISE

ISE Flowcells from EDT direction are solid state, Zero dead volume sensors that can be used independ..

£315.00

Sodium Standard Solution 1000ppm (500ml)

Sodium Standard Solution 1000ppm (500ml)

EDT directION produce a wide range of stock standards to ensure that ISE calibration is both simple,..

£17.00

Sodium Ionic Strength Adjustment Buffer (ISAB) 500ml (Glass ISE)

Sodium Ionic Strength Adjustment Buffer (ISAB) 500ml (Glass ISE)

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£27.00

Reference Flowcell (Reservoir Fill)

Reference Flowcell (Reservoir Fill)

The EDT directION 4001 Reference Electrode is designed for use with the ISE flowcells for Nitrate, A..

£250.00

Tags: Flowcell, ISE, Sodium

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960