The EDT direction Sodium ISE is a glass based 12mm bodied electrode which is sensitive to Sodium levels down to ppb levels.

This ISE operates in exactly the same way as a traditional combination pH electrode except the bulb glass is ultra-sensitive to changes in Sodium concentration.

An important consideration is that the pH of standards and samples need to be in the range pH9-12. If low level Sodium work is to be performed the pH should be 12 as the glass bulb is still sensitive to Hydrogen Ions which should be minimised.

Each EDT directION Combination ISE has a 1 metre cable and a BNC connector (other connectors available on request) allowing use on all types of pH/ION meter including laboratory bench and research models. For direct concentration reading and absolute simplicity the EDT DR359TX pH/ION meter is the perfect instrument for these ISEs.

For Quick Ion analysis for under £500 use our ION Concentration Calculator.

EDT are a UK based manufacturer and produce ISEs for many prominent companies in the water testing sector. As a result our ISEs are very competitively priced and come complete with technical support provided from our vast library of applications and our in house electrochemistry technicians.

For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs). Click here to see a simple calibration procedure or learn more about the principles of ISE measurement

Thumb File information
3301G Manual.pdf 1.01MB 106
Combination ISE Range Brochure.pdf 1.6MB 383
Cable length 1000mm
Cap Diameter 16mm
Commodity Code 90279050
Concentration Range 0.002-69,000 ppm
Connector BNC
Diameter 12mm
Endpoint time Typically 10-60 seconds
Interferences Lithium, Potassium, Barium, pH
length 155mm
pH range 9-12 pH
Potential Drift 2mV per Day
Reference Type Double Junction
Resistance at 25 Deg C < 2.5 MOhm
Temperature range 5-50 Degrees C

Write a review

Note: HTML is not translated!
    Bad           Good

Sodium Glass Combination ISE

  • £314.00

Related Products

Sodium Ionic Strength Adjustment Buffer (ISAB) 500ml

Sodium Ionic Strength Adjustment Buffer (ISAB) 500ml

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..


Sodium Standard Solution 1000ppm (500ml)

Sodium Standard Solution 1000ppm (500ml)

EDT directION produce a wide range of stock standards to ensure that ISE calibration is both simple,..


Tags: Electrode, ISE, Combination, Glass, Sodium

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960