EDT directION produce a wide range of stock standards to ensure that ISE calibration is both simple, accurate saving valuable time in a busy laboratory.  

All of our stock standards are 1000ppm and are supplied in 500ml leak proof bottles. It is anticipated that the end user will prepare standard sets by serial dilution of this stock standard as required.

Please ensure that lower concentration standards (typically below 10ppm) are not kept for future work as this gives cause to potential errors as concentration of these may be affected significantly during storage.

As these standards are used for ion analysis it is important that all standards are diluted using distilled or deionised water. Tap water or softened water cannot be used due to their high ionic content. For successful analysis most applications will require an ISAB (Ionic strength Adjustment Buffer).

All glassware should be clean. If glassware has been washed in tap water or in a glassware washing machine  it will need to be rinsed in deionised water prior to use. Residual water causes unwanted dilution so thoroughly dry glassware prior to use.

Be careful to avoid touching the insides of glassware or containers which are used for measurement if possible. The most common contaminants are Sodium and Chloride from sweat and in some applications this may not be desirable. It is advisable to prepare two standards which should have concentrations that span the expected sample concentration. e.g. a typical Nitrate in water analysis may yield a result of 40ppm . The standards should therefore be 100 and 10ppm made from two serial dilutions from the 1000ppm stock.

 

Thumb File information
MSDS Sodium Standard Solution 1000ppm.pdf 1.44MB 750
ISE Standards Brochure.pdf 1.79MB 712
Accessories
Commodity Code 38220000
Diameter 67mm
Filled Weight 510g
Height 195mm
Material HDPE (High Density Poly Ethylene)
Tamper Proof Cap Yes
Volume 500ml

Write a review

Note: HTML is not translated!
    Bad           Good

Sodium Standard Solution 1000ppm (500ml)

  • £20.00


Related Products

Sodium Ionic Strength Adjustment Buffer (ISAB) 500ml

Sodium Ionic Strength Adjustment Buffer (ISAB) 500ml

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£30.00

Sodium Glass Combination ISE

Sodium Glass Combination ISE

The EDT direction Sodium ISE is a glass based 12mm bodied electrode which is sensitive to Sodium lev..

£330.00

Sodium PVC Combination ISE

Sodium PVC Combination ISE

Here are some of the benefits of using EDT directION Combination Ion Selective  Electrodes..

£330.00

Sodium Ionic Strength Adjustment Buffer (ISAB) 500ml (Glass ISE)

Sodium Ionic Strength Adjustment Buffer (ISAB) 500ml (Glass ISE)

EDT directION manufacture a full range of standards, filling solutions and Ionic Strength Adjustment..

£30.00

Sodium PVC Flowcell

Sodium PVC Flowcell

ISE Flowcells from EDT direction are solid state, Zero dead volume sensors that can be used independ..

£330.00

Sodium Mini ISE (PVC)

Sodium Mini ISE (PVC)

EDT directION mini Ion selective electrodes are rugged solid state sensors that can be used inconjun..

£115.00

Tags: Solution, Standard, Sodium

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960