The EDT directION Flow plus range incorporates two solid state ISE’s in one 12 mm Epoxy body. One acts as the Sensor whilst the other is incorporated into the reference system. Watch Set up Video

Flow plus combination ISE's do not require a separate reference electrode, making it convenient to use with small sample volumes. The sensor and reference are solid state which ensures a longer shelf life than any other type of ISE.

The reference half-cell has a free-flowing liquid junction which will reduce drift and provide more stable readings than conventional ISE’s. Flow plus electrodes are ideal for measuring awkward or dirty samples, which would clog conventional reference electrodes.

Flow plus ISEs require a filling solution. Approximate capacity of the reference chamber is 3ml.

The Flow plus reference system has a liquid junction provided by a conical plug which is opened or closed by rotation of the electrode cap. The wider the opening between body and plug the faster the electrolyte flows. Low ionic strength samples and samples with high viscosity or particulates are examples of media that require this increased flow.

Flow plus ISEs are ideal in situations where drift, slow response times and reduced electrode lifetimes are a problem.

Each EDT directION Flow plus ISE has a 1 metre cable and a BNC connector (other connectors available on request) allowing use on all types of pH/ION meter including laboratory bench and research models.

For Quick Ion analysis for under £500 use our ION Concentration Calculator.

For direct concentration reading and absolute simplicity the EDT DR359TX pH/ION meter is the perfect instrument for these ISEs.

EDT are a UK based manufacturer and produce ISEs for many prominent companies in the water testing sector. As a result our ISEs are very competitively priced and come complete with technical support provided from our vast library of applications and our in house electrochemistry technicians.

For optimum results use EDT direction standards and Ionic Strength Adjustment Buffers ( ISABs).

Click here to see a simple calibration procedure or learn more about the principles of ISE measurement

Thumb File information
5051 Ammonium Flow Plus Manual.pdf 1.51MB 88
flow-plus-ises.pdf 1.41MB 868
Cable length 1000mm
Cap Diameter 16mm
Commodity Code 90279050
Concentration Range 0-9 - 9000 ppm
Connector BNC
Diameter 12mm
Endpoint time Typically 10-60 seconds
Interferences Potassium, Sodium
length 155mm
pH range 0-8.5 pH
Potential Drift 2mV per Day
Reference Type Liquid Junction.
Resistance at 25 Deg C < 2.5 MOhm
Temperature range 5-50 Degrees C

Write a review

Note: HTML is not translated!
    Bad           Good

Ammonium Flow Plus ISE

  • £417.00

Related Products

Ammonium Combination ISE

Ammonium Combination ISE

Here are some of the main benefits of using EDT direction Combination Ion Selective Electrodes:Rugge..


Direct Readout Bench pH/Ion Meter & Accessories

Direct Readout Bench pH/Ion Meter & Accessories

The DR359Tx is a straightforward Ion Meter with the ability to measure Ion concentration using up to..


Ammonium Flow Plus Filling Solution 30ml

Ammonium Flow Plus Filling Solution 30ml

Filling solution for use with the 5051 Ammonium Flow Plus ISE.Solution supplied in a 30ml bottl..


Tags: Ammonium

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960