The E8074 Glass Conductivity Cell is for general purpose dip applications and is ideal for general laboratory measurements over the range of 1uS/cm to 200mS/cm. Typical applications could range from checking the quality of source water to the quality control of Brine preparations.

The 12mm glass body has two internal active platinum electrodes 1cm apart which have to be submerged in the samples to a minimum depth of around 2cm.

The E8074 Conductivity cell is suitable for use with the Series 4 QP481 and QP458 conductivity meters only and contains a temperature sensor to enable all readings to be temperature compensated (ATC). Calibration solutions are available and the recommendation for general purpose cells (K=1) is to calibrate using a 1413uS/cm standard such as EDT A3052and A3053.

Temperature reading and compensation range is 0-50 degrees centigrade. For accurate analysis below 5uS/cm use a K=0.1 cell (E8075). For process measurements or where the use of glass is not acceptable EDT manufacture a complete range of Conductivity cells to suit most applications.

The E8074 Conductivity cell has a fixed 1 metre cable with a Mini DIN connector to fit Series 4 EDT meters. We also manufacture conductivity cells compatible with most models and make of instrument. Contact us so that we can advise the part number and price


Thumb File information
E8074 Brochure.pdf 1.71MB 71
Accessories
Body Type Glass
Cell Type Platinum Plates
Commodity Code 90270905
Conductivity Cell Range 100µS-100mS
Connector Mini DIN Connector for EDT Conductivity Meters
Diameter 12mm
length 155mm

Write a review

Note: HTML is not translated!
    Bad           Good

Glass Conductivity Cell K=1 Mini DIN Connector

  • £86.00


Related Products

Conductivity Calibration Solution 1413µS/cm 500ml

Conductivity Calibration Solution 1413µS/cm 500ml

EDT directION manufacture a range of conductivity calibration solutions to enable the successful and..

£20.00

Series 4 Portable Conductivity/TDS Meter

Series 4 Portable Conductivity/TDS Meter

The QP481 Portable Conductivity/TDS meter is the second in a series of Quality Portable meters from..

£295.00

Series 4 Portable Combined pH and Conductivity /TDS Meter

Series 4 Portable Combined pH and Conductivity /TDS Meter

The QP458 Portable combined pH and Conductivity meter is the third in a series of Quality Portable m..

£495.00

Tags: Conductivity, Glass, K=1, Mini DIN

We deliver to all countries worldwide

For International orders call our sales hotline on +44 (0) 1304 829960