The SALCON II model is a robust direct reading instrument designed for use in the field or workshop/Laboratory to provide a direct % Chloride or % Salt content in Wash solutions, food and industrial products . The meter has a built in correction allowing for the use of Tap water as the blank solution by correcting automatically for its inherent conductivity.
British and European Standards.
Water soluble Chloride ion content requirements can be summarised in the European and British Standards BS EN 12620 and BS EN 206-1.
BS EN 206-1 defines the chloride class depending on the type of reinforcing to be used. The class specifies the maximum Chloride content in concrete by mass of cement from the total contribution of all the constituents.
The EDT SALCON II meter is designed to assist in the monitoring and management of the Chloride marine aggregate producers’
factory control procedures as required by BS EN 12620
The Meter has a Rubber protective boot and tough carry case included as standard.
Features include:
· Direct Concentration Readout down to 0.001% Chloride (Reads % Salt to 0.001% NaCl)
· Automatic correction for Tap Water (Blank correction)
· Auto Endpoint
· Results storage in the Internal memory
· Backlit display with Brightness and contrast control.
· Automatic Temperature Correction (ATC)
· Automatic Calibration using actual NaCl conductivity data.*
· Portable with a 200 hour continuous battery life**
The SALCON II Kit includes the Meter, RB400 Rubber Boot, E5019 Rugged Conductivity Cell, 4 x AA Batteries, 2 x 100ml Bottle, 500ml Salcon II Standard Solution. To see an unpacking video, click here.
Thumb | File information |
SALCON II Meter Brochure.pdf File Size 1.19MB Downloaded: 268 | |
Series 4 Brochure.pdf File Size 1.78MB Downloaded: 281 | |
SALCON II Manual.pdf File Size 1.59MB Downloaded: 410 |
Meters | |
Chloride Concentration | Direct Reading as % Chloride. Resolution 0.001% Range 0-30% (Saturation) |
Data Logging | Maximum data points 64,000. Log period 10 seconds to 99 hrs.59mins .59 secs Log interval minimum 1 second. |
Salt Concentration | Direct Reading as % NaCL. Resolution 0.001% Range 0-50% (Saturation) |
Automatic Temperature Compensation (ATC) | ATC across the entire range |
Autoranging (Conductivity) | Select the correct unit range Automatically. |
Battery Life | Over 200 Hours continuous use. Power saving features include: Auto off, Backlight control, logging sleep mode. |
Commodity Code | 90278011 |
Conductivity Accuracy | +/- 0.2% of Reading |
Conductivity Range | Auto-ranging from 0- 999mS/cm. in appropriate units |
Conductivity Resolution | Resolves to 0.01uS/cm in the low range. Otherwise 4 Significant figures. |
Connection | Multi pin DIN for Conductivity/Temperature combined probe. |
Data Output | Mini USB. Outputs csv at 38400 Baud |
Data Storage | Dynamic Internal storage of up to 64 files. Logging maximum 10,000 data points |
Display | Backlit LCD Graphic Display |
Power requirement | 4 X AA Batteries |
Reference Temperature | Set at 25 degrees C. |
Size | 175x88x48mm (lwh). Meter Only |
Temperature Coefficient | Set at 2% Per degree. |
Weight | 350g Meter Only |
Accessories | |
Temperature range | -30 to +130 Degrees Centigrade |
Salcon II Salt Concentration Meter Kit
- Brand: EDT directION Limited
- Product Code: Salcon II
- Availability: In Stock
-
£495.00
Related Products
Tags: Meter, Portable, Salt Concentration, Series 4